Leafdrip pH3 | working solution acidity corrector

Leafdrip pH3 — water acidity corrector for effective plant protection
Leafdrip pH3 is a modern working solution acidity corrector that “prepares” water for the most effective operation of plant protection products (PPP) and fertilizers. The product stabilizes pH, improves the quality of tank mixtures and increases the effectiveness of field treatments.

🔍 What is a pH corrector and why is it needed?

Water quality is a critical factor in the effectiveness of spraying. Alkaline water (pH > 7) can:

reduce the effectiveness of pesticides
cause alkaline hydrolysis of active ingredients
deteriorate the mixing of components
Leafdrip pH3 solves these problems by ensuring the optimal pH level of the working solution.

✅ Benefits of Leafdrip pH3
Adjustment of water pH to the optimal level (usually 5.0–6.5)
Prevention of alkaline hydrolysis of pesticides
Neutralization of water hardness (Ca²⁺, Mg²⁺)
Improvement of tank mix compatibility
Color indicator for quick pH control
Reduction of surface tension - better coverage of the leaf surface
💧 How does Leafdrip pH3 work?
Product:

Reduces the pH of the working solution
Stabilizes active ingredients
Improves penetration of the drug into the plant
Increases the effectiveness of treatment even with hard water
🎯 When to use an acidity corrector?
It is recommended to use Leafdrip pH3 if:

water has a pH above 7
hard water is observed
pH-sensitive preparations are used
maximum effectiveness of pesticides is required
📊 Leafdrip pH3 application rates
The rate depends on the initial pH level of the water:

at pH 7.0–7.5 → ~3.5–5.5 ml/l
at pH 7.5–8.5 → ~3.9–6.25 ml/l
at pH 8.5–9.5 → ~5–7.25 ml/l
at pH > 9.5 → up to 8 ml/l
👉 It is recommended to conduct a test mixing for accurate selection of the rate.

🎨 Visual pH control
Leafdrip pH3 contains a color indicator that changes depending on the pH level:

red/orange - acidic environment
yellow - optimal pH
light - alkaline environment
This allows the agronomist to quickly assess the quality of the working solution right in the tank.

⚙️ Recommendations for use
Add Leafdrip pH3 first to the tank mixture
Add to a sprayer tank filled 2/3 full
Conduct a test mix before use
Adjust the rate depending on the water quality
🌱 Why is it important for the crop?
Correct pH:

increases the effectiveness of crop protection products by 30–50%
reduces product losses
ensures uniform coverage
improves treatment results
📞 Order Leafdrip pH3
Contact Agrimatco-Ukraine for consultation and selection of the optimal nutrition and protection technology:

📍 We work throughout Ukraine
📦 Product in stock
👨‍🌾 Agronomic support